Home About us Products Models News Honor Network Contact us Substation
location:Home > conveyor component solutionNews > Self aligning ball bearing check the working state of the sound

Products
More models
Deep Groove Ball Bearing
KA Nylon Retainer Bearing
Deep Groove Ball Bearing
Black Chamfer lmported Process Bearing
35 Class Spherical Roller Bearing
36 Class Spherical Roller Bearing
Lightweight Spherical Roller Bearing
Self-Aligning Ball Bearing
One Way Backstop Bearing
Self aligning ball bearing check the working state of the sound
Clicks:24921 Date:12-20
1, self aligning ball bearing temperature rise reasons:
(1) the cooling water of.Self aligning ball bearing is interrupted.
(2) oil deterioration, oil itself is not clean or oil deterioration in operation, such as the increase of moisture in the oil will cause the increase of oil acidity. It will reduce the lubrication effect of the oil and cause the corrosion of the bearing bush, resulting in the increase of self aligning ball bearing temperature.
2. Phenomenon:
(1). There are alarm bells ringing.
(2). Beside the disc turbine machinery fault light plate light, indicating that the self aligning ball bearing temperature meter temperature signal relay.
(3). The thermometer plate (expansion thermometer) black needle and yellow needle overlap or exceed the yellow needle.
(4). A fault signal that raises the temperature of self aligning ball bearing.
3. Treatment
When the temperature of self aligning ball bearing rises, the first judge whether or not to do misoperation, if it does rise, should be dealt with as follows:
(1) check the water pressure of cooling water, water flow and pipeline system is normal. If the water pressure is low, the filter can be blocked and can not be processed in time. It can be shut down and then put into use when it is confirmed that it can work.
(2). The hydraulic pressure of the governor should be checked. If the oil pressure is low, the hydraulic valve of the cooling water may be closed.
(3). Check whether the self aligning ball bearing has a sound, and check whether the self aligning ball bearing pendulum has an exception.
(4). Oil sampling observation of oil color is changing, and tests to see if spoilage. If the deterioration is confirmed, the new oil should be replaced by the shutdown.
(5). Check whether the oil level is normal or not, if it is not normal, check whether the oil drain valve is closed. If it is closed, the oil should be filled. If it is sealant, the oil should be shut down.
Previous article: Self aligning ball bearing installation steps      Next article: Common sense of maintenance of self aligning ball bearing exception
Recommended reading
How to repair the self aligning ball bearing overheating problem? 2018.1.15
Causes and maintenance measures that cause damage to self aligning bal 2017.12.23
Causes and treatment methods for oil leakage of self aligning ball bea 2018.1.4
Recommended products
bearing 6310 C4 for idler
bearing 6310 C4 for idler
bearing 6309 C4 for idler
bearing 6309 C4 for idler
bearing 6308 C4 for idler
bearing 6308 C4 for idler
bearing 6307 C4 for idler
bearing 6307 C4 for idler
 
Corporate Information
Home
Abouts Us
Products
News
Honors
Substation
 
Contacts
+86 635 5638235
Fax:+86 635 5638808
Address:Xu Village Industrial Garden, Gan Town, Guan County, Shandong
 
Follow us
 
Copyright © 2017 Shandong Xinkaite Bearing Co.,Ltd.